How to fix a Honeywell T8000C when the display does not come on?
If the Honeywell Thermostat display isn't turning on, make sure the thermostat is properly mounted and latched on the wallplate. Also, check the circuit breaker and reset it if it has tripped. Examine the fuse and replace it if it's blown. Finally, ensure the switch at the equipment is in the On position.
Why is my Honeywell T8000C heating not working?
If the heating isn't turning on for your Honeywell Thermostat, check the circuit breaker and reset it if needed. Also, check the fuse and replace it if it's blown. Ensure the switch at the equipment is in the On position. Allow five minutes for the system to respond. Finally, make sure the SYSTEM switch is set to Heat.
Why is my Honeywell T8000C Thermostat cooling not working?
If the cooling isn't turning on for your Honeywell Thermostat, check the circuit breaker and reset it if it has tripped. Also, check the fuse and replace it if it's blown. Ensure the switch at the equipment is in the On position. Allow five minutes for the system to respond. Finally, set the SYSTEM switch to Cool.
What to do if my Honeywell T8000C is on but no air is coming out?
If the system on indicator is lit on your Honeywell Thermostat, but no warm or cool air is coming from the registers, wait a couple of minutes after seeing the flame or snowflake and then check the registers.
Why is the Honeywell Thermostat system indicator flashing?
If the system on indicator is flashing on your Honeywell Thermostat, the minimum off-timer is in effect. Wait five minutes until the minimum off-timer is complete.
Why is the system on indicator flashing on my Honeywell Thermostat?
If the system on indicator is flashing on your Honeywell Thermostat, please wait five minutes until the minimum off timer is complete.
General| Brand | Honeywell |
|---|---|
| Model | T8000C |
| Category | Thermostat |
| Language | English |
Details the functions of the Hold, Increase, Decrease, and Select keys on the thermostat.
Explains the operation of the System and Fan switches for thermostat control.
Instructions for setting the sleep time and temperature for the weekday program.
How to set the leave time and temperature for weekend programming.
How to set return and sleep times/temperatures for weekend programming.
Guide on how to use the SYSTEM and FAN switches for thermostat operation.
To Next Page
