EasyManua.ls Logo

Honeywell Thermostat PRO TH3000 Series - Battery replacement

Honeywell Thermostat PRO TH3000 Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRO TH3110D / TH3210D
9
Batteries are optional (for backup
power) if your thermostat was wired to
run on AC power when installed.
Install fresh batteries when the REPLACE
BATT warning begins flashing. The
warning flashes about two months
before the batteries are depleted.
Replace batteries once a year, or
before leaving home for more than a
month. Batteries provide backup power
to the display during power interrup-
tions. All settings are permanently
stored in memory, and do not require
battery power.
Pull at bottom to
remove thermostat
from wallplate.
Turn thermostat over,
insert fresh AA alka-
line batteries, then
reinstall thermostat.
Battery replacement

Related product manuals