EasyManuals Logo

Honeywell Thor VM3 Quick Start Guide

Honeywell Thor VM3
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
exceed this temperature, from physical damage from
moving parts, and from chemicals or oil that cause the
insulation to deteriorate.
4. Avoid sharp bends. The power cable is less flexible in low
temperature environments.
5. Route the cable the shortest way possible removing any
leftover cable, making sure the cable does not interfere with
safe operation and maintenance of the vehicle.
6. Secure the cable to the vehicle structure at approximately
one foot intervals, taking care not to over tighten, pinch
conductors, or penetrate the insulation.
7. Use proper electrical and mechanical fastening means for
terminating the cable. Properly sized “crimp” type electrical
terminals are an accepted method of termination. Select
electrical connectors sized for use with 20AWG (0.81mm2)
conductors.
8. Connect the watertight connector end of the power cable to
the Smart Dock power connector by aligning the connector
pins to the power connector; push down on the watertight
connector and twist it to fasten securely.
9. Secure the power cable to the dock using strain relief cable
clamps, and place the Thor VM3 in the dock.
10. If using the Screen Blanking feature, install the screen
blanking box or switch. (Refer to the installation
instructions that came with the Screen Blanking box, or to
the Thor VM3 User’s Guide, available at
www.honeywellaidc.com for further information.)
11. Move the power switch on the back of the dock to the on
position.
12. Press the power button on the front of the Thor VM3.

Other manuals for Honeywell Thor VM3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Thor VM3 and is the answer not in the manual?

Honeywell Thor VM3 Specifications

General IconGeneral
SteppingD0
Tjunction-40 °C
FSB ParityNo
Processor codeSR1X8
Processor cache1 MB
Processor cores2
Processor modelE3826
System bus rate- GT/s
Processor familyIntel Atom®
Processor codenameBay Trail
Processor frequency1.46 GHz
Processor cache typeL2
Processor manufacturerIntel
Processor package size25 x 27 mm
Conflict-Free processorYes
Processor front side bus- MHz
Processor operating modes32-bit, 64-bit
Graphics & IMC lithography22 nm
PCI Express configurations1x1, 1x4, 2x1
Thermal Design Power (TDP)7 W
Internal memory4 GB
Internal memory typeDDR3-SDRAM
Storage mediaFlash
Compatible memory cards-
Internal storage capacity64 GB
Display diagonal12.1 \
Display brightness900 cd/m²
Display resolution1024 x 768 pixels
Graphics cardHD Graphics
Rear camera resolution (numeric)- MP
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version2.0+EDR
Top Wi-Fi standardWi-Fi 4 (802.11n)
HDMI ports quantity0
USB 2.0 ports quantity1
I/O ports1x CAN-bus, RF
Processor ARK ID78477
Processor socketBGA 1170
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)5 - 95 %
PlatformWindows
Bundled softwareData Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installedWindows 7
AC adapter input voltage90 - 240 V
Battery capacity- mAh
Battery life (max)0.5 h
CertificationEN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device typeTablet PC
Form factorSlate
Product colorGrey, Silver
Protection featuresShock resistant, Vibration proof, Water resistant
International Protection (IP) codeIP66
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth62 mm
Width318 mm
Height260 mm
Weight3000 g

Related product manuals