EasyManua.ls Logo

Honeywell TRADELINE T8011R - Setting Temperature Hold; Temporary Temperature Hold; Indefinite Temperature Hold

Honeywell TRADELINE T8011R
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T8011R PROGRAMMABLE HEAT PUMP THERMOSTAT
68-01961
8
b. Press Select.
Press or to set
Return temperature.
6. Sleep
a. Press Select.
Press or to set
Sleep time.
b. Press Select.
Press or to set
Sleep temperature.
Setting the Weekend Program
7. Wake
a. Press Select.
Press or to set
Wake time.
b. Press Select.
Press or to set
Wake temperature.
8. Leave
a. Press Select.
Press or to set
Leave time.
b. Press Select.
Press or to set
Leave temperature.
9. Return
a. Press Select.
Press or to set
Return time.
b. Press Select.
Press or to set
Return temperature.
10. Sleep
a. Press Select.
Press or to set
Sleep time.
b. Press Select.
Press or to set
Sleep temperature.
11. End Programming.
Press Select. End is
displayed. Programming is
complete. The thermostat
will revert to displaying the
current day, time and
temperature in five
seconds.
NOTE: To reset the thermostat to the preprogrammed time
and temperature settings (see Table 1):
a. Press and hold the Hold and Select keys
simultaneously. The display will begin counting
down from 36 to zero.
b. The thermostat display will go blank, then will
display the current time and temperature.
c. Release keys, the program has reverted to the
preprogrammed time and temperature settings.
Setting Temperature Hold
Slide the SYSTEM switch to the heat or cool position.
Temporary Temperature Hold
1. Press or key to select
a temporary temperature
setting.
NOTE: The temporary temperature setting is displayed for
approximately 3 seconds and remains in effect until
the next program period. To cancel, press Hold twice.
Indefinite Temperature Hold
The Hold key allows you to indefinitely hold a temperature.
When Hold is active, the letters Hld are displayed continuously.
Hold can be canceled by pressing the Hold key again.
1. Press Hold
2. Press or key to select
indefinite temperature
setting.
NOTE: Indefinite hold remains in effect until the Hold key is
pressed to cancel it.
M12629A
M12630A
M12631B
M12632A
M12633B
M12634A
M12636A
M12635A
M12637A
M12638A
M12639B
M12511A
M12640A
TEMPORARY
WED
PM
M12641A

Related product manuals