Honeywell VNT5150H1000 - Page 16

ERV/HRVVentilationSystems69-2480EF—01
14
InstallationSteps(continued)
3
Hanging the ERV/HRV
1.Attachstrapstojoistusingthesupplied
 washersandfour1in.hex-headhanging
 screws.
TheERV/HRVunitenablesyoutosavetimeandeffortbyofferingasimplifiedhangingsystem.
NOTE: Iftheunitisnotlevel,improperdrainagewilloccurandcouldleadtomoistureandleakage
problems.
2.Pullonmiddleofstrapwhilegentlyliftingunit
 upwardtoraisetheunit.
3.MakenaladjustmentstoensurethattheHRV/ERVislevel.
TIP: Removingthecoreunitmakesinstallationeasiersincetheunitweighsless
withoutthecoreinside.