Honeywell WebVision - Page 131

WEBVISION™
131 95-7769—01
Next State X Default
Occupied
Unoccupied
Bypass
Standby
Time To Next State X Units=min
Precision=0
Min=0.0
Max=65535.0
DLC Shed X Shed or Restore
Out Of Limits X True or False
Open Circuit X True or False
Out Of Service X True or False
Mechanical Fault X True or False
Feedback Failure X True or False
Over Range X True or False
Under Range X True or False
Electrical Fault X True or False
Unable To Measure X True or False
Communication Failure X True or False
Fail Self Test X True or False
Self Test In Progress X True or False
Locked Out X True or False
Manual Control X True or False
Application Mode X X X X Default
Auto
Heat
Morning Warmup
Cool
Night Purge
Pre-cool
Off
Test
Emergency Heat
Fan Only
Free Cool
Ice
Maximum Heat
Economy
Dehumidify
Calibrate
Emergency Cool
Emergency Steam
Max Cool
HVAC Load
No Load
Fan Speed X X X X Off
Zero
Low
Medium
High
Auto
Table 81. HYD Application of Points. (Continued)
Point name Graphics Alarms Trends Commandable Internal Use Valid Values