Honeywell WebVision - Page 150

WEBVISION™
95-7769—01 150
Heat Cool Switch X X X Off or On
Heat Stages X X X Units=null
Precision=0
Min=0.0
Max=3.0
IO Test In X X X False or True
IO Test Switch X X X Off or On
Low Flow Alarm X X X False or True
Manual Occupancy X X X Default
Occupied
Unoccupied
Bypass
Standby
Mode X X X Startup Wait
Heat
Cool
Reheat
Morning Warm-up
Night Purge
Pressurize
Depressurize
Track Flow
Manual Position
Manual Flow
Freeze Protect
Factory Test
IO Test
Floating Out of Sync
Disabled
Manual
Model X X X Units=null
Precision=0
Min=0.0
Max=3.0
Monitor Switch X X X Off or On
Monitor Switch X X X Off or On
Occupancy Sensor X X X Unoccupied
Occupied
Override X X X Default
Occupied
Unoccupied
Bypass
Standby
Override IO X X X False or True
Peripheral Heat On X X X Off or On
Peripheral Heat Position X X X Units=%
Precision=1
Min=0.0
Max=100.0
Reheat Position X X X Units=%
Precision=1
Min=0.0
Max=100.0
Table 87. VAV II Application of Points (Continued)
Point Name Graphics Alarms Trends Commandable Internal Use Valid Values