Honeywell X-DA1500EN - Technical Specifications; Power and Output Specifications; Performance Specifications; Indicator Lights Specification

12
Technical Specifications
Parameter
Value
Nominal output power
1 X 500W
2 X 250W
4 X 125W
Main power supply
voltage
~ 100V-240V 50/60Hz
Backup power supply
voltage
21.5V DC ~ 28.5V DC
Power consumption
<700W
Main fuse
T10AL 250V
Speaker output voltage
100V / 70V
Frequency response
70Hz～18KHz （+1dB ~ -3dB）
Input sensitivity
1.414V
RMS
Input impedance
20k ohm
Signal to noise ratio
100dB （with A-Weight）
Non-linear distortion
0.05% （ at 1/3 rated power, 1kHz）
Indicator
lights
1 power indicator light
1main power fault light
1 Backup power fault light
1 Channel
1 signal lights
1 peak clipping lights
1 equipment protection lights
2 Channels
2 signal lights
2 peak clipping lights
2 equipment protection lights