Honeywell X Series Installation Instruction Sheet

43-TV-33-76 iss.2 GLO Jan 21 UK 7
QX Recorder
To fit a new backlight the case and back panel must be removed. The case and back panel can be removed as a single
assembly. Remove the 2 screws on each side of the case as shown in Fig 11 below
Slide the case and rear
panel assembly off the
recorder.
Fig 11
Remove 2 screws from
each side of the case
Fig 12

Honeywell X Series Specifications

General

Brand	Honeywell
Model	X Series
Category	Voice Recorder
Language	English