Honeywell DR4300 User Manual

Sensing and Control
DR4300
Circular Chart Recorder
Product Manual
44-01-25-14E
4/00

Honeywell DR4300 Specifications

General

Brand	Honeywell
Model	DR4300
Category	Voice Recorder
Language	English

Summary

1. OVERVIEW

2. Installation

2.2 Mounting Considerations and Overall Dimensions

Physical considerations and dimensional requirements for mounting the DR4300 recorder.

2.3 Mounting Methods

Provides instructions for various methods of mounting the DR4300 recorder.

2.5 Input Wiring

Procedures for wiring power, analog inputs, digital inputs, and communication.

3. CONFIGURATION, STARTUP, AND OPERATION OF BASIC RECORDER WITHOUT DISPLAY

3.2 Configuration (Recording Set Up)

Instructions for setting up recording selections and input types using switches.

4. CONFIGURATION, STARTUP AND OPERATION OF RECORDER WITH DISPLAY

4.3 Configuration (Recording and Output Set Up)

Instructions for setting up recording and output options for DR4300 models with display.

4.4 Startup of Recorder with Display and Keypad

Procedures for starting up DR4300 recorders with display and keypad.

5. INPUT AND OUTPUT CALIBRATION FOR RECORDER WITH DISPLAY

5.4 Input Calibration Set Up and Wiring

Details the setup and wiring procedures for calibrating analog inputs.

5.5 Input Calibration Procedure

6. ROUTINE MAINTENANCE

7. TROUBLESHOOTING AND PEN ALIGNMENT OF BASIC RECORDER WITHOUT DISPLAY

7.2 Observable Symptoms of Failure

7.3 Troubleshooting Procedures

8. TROUBLESHOOTING AND PEN ALIGNMENT OF RECORDER WITH DISPLAY

8.3 Self Diagnostics

8.5 Troubleshooting Procedures

C. Setpoint Ramp/Soak Programming and Operation

D. Using Accutune II

D.2 Starting and Stopping Tuning with Accutune II