Honeywell DR 4200 - User Manual

06/26/13 Kit Instruction 44-45-33-33B 1 of 4
Honeywell
DR 4200, DR4300, DR 4500 & DR 4500A
Circular Chart Recorders
Latch Assembly Kit 30756584-001
Lock Assembly Kit 30756584-002
KIT INSTRUCTION 44-45-33-33B
Summary
The assembly kit contains all the components you need to replace the latch assembly on the door of a
DR 4200, DR4300, DR 4500 or DR 4500A recorder. Table 1 lists contents of the kit. Note that three
housing retainers are supplied - one is for use with DR 4200 recorders; one is for older DR 4500 &
DR 4500A recorders and one is for newer DR4500A & DR4300 Recorders. Use the appropriate procedure
to install the kit. The procedures assume that the chart door is opened, the chart plate is swung out, and the
power is removed.
Table 1 - Kit Contents
LATCH
30756584-001
LOCK
30756584-002
Component Part Number Qty Qty
Latch 30756100-001 1 0
Barrel 30756208-001 1 0
O-ring 30756216-001 1 0
Retaining Nut 30756209-001 1 0
Washer - Delrin 30756218-001 1 1
Latch Retainer 30756102-001 1 1
Housing Retainer – Older
(DR 4500 & DR 4500A)
30756204-001 1 1
Housing Retainer – Newer
(DR4500A & DR4300)
51205576-001 1 1
Housing Retainer (DR 4200) 30756101-001 1 1
Screw (10-32) 30674113-012 1 1
Cam 30756207-001 1 0
Screw (#10) 30000005-004 1 0
Washer 30004950-000 1 0
Lock Cylinder Assembly 30756047-001 0 1
Washer - S. Steel 30756218-002 1 1
Removal Procedure
door
Latch Assembly
1. Push down on side clip, and push latch pin
out through hole in outer edge of door. Use
needle-nose pliers to remove pin, and
discard latch assembly.
Removing Latch Assembly
(Old Design)

Summary

Removal Procedure

Removing Latch Assembly (Old Design)

Procedure for removing the latch assembly from older designs of the recorder.

Installation - Latch Assembly

Installing Latch Assembly Kit

Instructions for installing the latch assembly kit components onto the recorder door.

Installing Latch on Chart Plate

Steps for attaching the latch mechanism to the recorder's chart plate.

Installation - Lock Assembly

Installing Lock Assembly Kit

Procedure for installing the lock assembly kit onto the recorder door.

Installing Latch on Chart Plate

Steps to secure the chart plate after the lock cylinder assembly is installed.

Honeywell DR 4200 Specifications

General

Brand	Honeywell
Model	DR 4200
Category	Voice Recorder
Language	English