XP Series Personal Gas Detector
6
What’s in the Box?
XP Series Personal Gas Detector
Test Adapter
Operating Instructions and Maintenance Manual
Certificate of Calibration
Product Overview
Visual Alarm
Display
Gas Type
Audible Alarm
On/Off Button
Sensor
Belt Clip
Up Button
Down Button
2. Turning the Detector On and Off
Press the On/Off button for one second and the XP will turn on.
The detector will emit 5 beeps and 5 flashes. XP will warm up for 30 seconds, showing a countdown in
seconds and the Test Pass icon ( ) will be flashing. It will then perform a self-test. If the detector passes
the Test Pass icon ( ) is displayed. If the Test Fail icon ( ) is displayed then the detector has failed the
self-test – please refer to the instructions in Section 6.
To turn off the XP press and hold the On/Off button for 5 seconds - a countdown will be displayed.
•
•
•
•
To Next Page
Loading...
Need help?
General
