Set the Date and Time Automatically or Manually
• Enable Set automatically, and your phone will sync to the local date and time over a
mobile network.
• To manually set the date and time, disable Set automatically.
Change the Time Zone
• Enable Set automatically, and your phone will sync to the local time zone over a mobile
network.
• To manually set the time zone, disable Set automatically.
Change the Time Format
• Enable 24-hour time and your phone will display time in the 24-hour format.
• Disable 24-hour time and your phone will display time in the 12-hour format.
Use Device Clone to Move Data to Your New Device
Device Clone lets you quickly and seamlessly move all the basic data (including contacts,
calendar, images, and videos) from your old phone to your new phone.
Migrate Data from a Device
1
On your new phone, open the Device Clone app. Alternatively, go to Settings > System
& updates > Device Clone, touch is is the new device, then select old device type.
2
Follow the onscreen instructions to download and install Device Clone on your old
device.
3
On your old device, open the Device Clone app and touch is is the old device. Follow
the onscreen instructions to connect your old device with your new phone by scanning
a code or connecting manually.
4
On your old device, select the data you want to clone, then touch Transfer to
cloning.
Device Clone is only available on phones running Android 7.0 or later, iOS 8.0 or later.
Back Up with an External Storage Device
Back up data to USB storage devices
When the phone is low on storage space, you should regularly back up large or
data to a USB storage device (e.g., USB drive, card reader).
1 Connect the phone to the USB storage device with a USB OTG cable.
2 Go to phone Settings > System & updates > Backup & restore > Data backup >
External storage and select USB storage on the External storage screen.
3 Tap BACK UP, check the data you want to back up, and tap Back up.
4 When backing up for the time, follow the on-screen instructions to set the
password and password hint. data will be when backing up. Please
Settings
127