Stop Connected Input
Method 1: On the Connected Input screen of your PC, drag the phone/tablet out of the
valid area. When the device image changes to a ball, the input is disconnected.
Method 2: On the Connected Input screen of your PC, move the mouse cursor to the
phone/tablet image and tap .
Phone and HONOR PC Collaboration
Multi-screen Collaboration Between Your Phone and PC
Connect your phone with a Honor PC to use Multi-screen Collaboration for cross-device
control, sharing, and editing.
Connect Your Phone to the PC through HONOR Share OneHop
1 Ensure that the PC .
2
On the PC, enable Wi-Fi, Bluetooth, and PC Manager, and agree to the user license
agreement.
3
On your phone, swipe down from the top right of the screen to open the Control Center,
then enable NFC, Wi-Fi, and Bluetooth.
4
Place the NFC area (NFC sensing area location of HONOR phone) on the back of your
phone against the label on the PC until your phone vibrates or plays a tone.
5
Follow the onscreen instructions to connect your phone and PC.
Connect Your Phone to the PC by Using Bluetooth Search
1
On your phone, Swipe down from the top right of the screen to open the Control
Center, and enable .
2 Open PC Manager (version 10.0 or later), go to Multi-screen Collaboration > Phone
Collaboration > Other ways to connect, and select to search for your phone over
Bluetooth. Place your phone above the keyboard and your PC will searching for
your phone.
To check the version of PC Manager, go to > About. To update PC Manager, go to
> Check for updates.
3 Follow the onscreen instructions to connect your phone and PC.
Connect Your Phone to the PC with a USB Cable
1 Use a USB cable to connect your phone and PC.
2 On the PC, open PC Manager (version 10.1 or later).
Collaboration
28
To Next Page
Loading...
