• If the large display does not suppo Miracast, connect a wireless HDMI adapter to
it. Ensure that the wireless HDMI adapter is connected to a power supply.
To check whether the large display Miracast and how to enable wireless projection
on it, consult the user guide or customer of the large display manufacturer.
2 On your phone, swipe down from the top right of the screen to open the Control Center,
and turn on .
3 Swipe down again to show all and enable Wireless Projection. Your phone will
searching for available display devices.
4 In the device list, touch the name corresponding to the large display or wireless HDMI
adapter to complete the projection connection.
After the connection is set up, you can place your phone in landscape mode for a better
display.
Alternatively, swipe down from the top middle or left of the screen to open the
Center, and touch Disconnect.
Phone Projection Using a Wired Connection
You can project your phone screen on a large display (for example, a TV) using a wired
connection.
It is recommended that you purchase the accessories from authorized channels.
Projection Using a Type-C Cable
1
Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your
large display.
2 Connect the Type-C end to your phone and the other end to the large display.
Collaboration
36
To Next Page
Loading...
