1 Swipe down from the top right of the screen to open the Control Center. Turn on Mobile
data.
2 Touch the text under
until a prompt is displayed, then select a SIM card and touch
OK.
When the prompt is displayed, touch SETTINGS to access the SIM management screen.
eSIM
Embedded-SIM (eSIM) is a SIM card that can be used instead of a physical SIM card.
An eSIM card works in the same way as a physical SIM card, but occupies no space and can
be linked with multiple card numbers. You are free to switch between carriers to the
best deal for you.
• feature may depending on your carrier.
• feature is only available in some countries and regions.
• feature may by device.
Apply for an eSIM Card
Contact your carrier to apply for an eSIM card.
You need to provide the embedded-SIM ID (EID) information when applying for an eSIM
card. information is related to whether your phone has a built-in eSIM chipset.
To view this information, go to Settings > About phone > EID. If the EID information is not
displayed, it indicates that this feature is not on your phone.
• You can apply for multiple eSIM cards, the maximum number of which is determined by the
eSIM chipset capacity of your phone. If the number of eSIM cards you apply for has exceeded
the limit, you will see a prompt on your phone indicating that you cannot add any more eSIM
cards.
• Only one eSIM card can be used at a time.
Add an eSIM Card
1 Go to Settings > Mobile network > SIM management.
• If your phone is a single-SIM device, the SIM management screen still displays two
options: SIM 1 and SIM 2. By default, the eSIM card is installed in SIM 2 slot.
• If your phone is a dual-SIM device and a physical SIM card is already in SIM 2 slot,
you will be prompted to disable SIM 2 when adding an eSIM card. or removing
SIM 2 will not the eSIM
2 Touch next to SIM 2. any of the following operations to add the eSIM card:
Get Familiar
5
To Next Page
Loading...
