honor Magic Vs - Page 101

You need to provide the embedded-SIM ID (EID) information when applying for an eSIM
card.  information is related to whether your phone has a built-in eSIM  chipset.
To view this information, go to Settings > About phone > EID. If the EID information is not
displayed, it indicates that this feature is not  on your phone.
• You can apply for multiple eSIM cards, the maximum number of which is determined by the
eSIM chipset capacity of your phone. If the number of eSIM cards you apply for has exceeded
the limit, you will see a prompt on your phone indicating that you cannot add any more eSIM
cards.
• Only one eSIM card can be used at a time.
Add an eSIM Card
1 Go to Settings > Mobile network > SIM management.
• If your phone is a single-SIM device, the SIM management screen still displays two
options: SIM 1 and SIM 2. By default, the eSIM card is installed in SIM 2 slot.
• If your phone is a dual-SIM device and a physical SIM card is already  in SIM 2 slot,
you will be prompted to disable SIM 2 when adding an eSIM card.  or removing
SIM 2 will not  the eSIM 
2 Touch next to SIM 2.  any of the following operations to add the eSIM card:
• Scan the QR code: After you apply for an eSIM card number, the carrier will provide a
QR code. After you scan the QR code, your phone will download and install the
  and enable the new eSIM card by default.
• Scan the image: If you cannot use the camera to scan the QR code provided by the
carrier (for example, when you are applying for an eSIM card through the carrier's
app), save the QR code provided by the carrier as an image. Touch Select from
Galle while scanning a QR code, and select the saved QR code image. Your phone
will automatically identify the QR code and download and install the 

• Enter the activation code: Touch Enter manually then follow the onscreen
instructions to enter the activation code provided by your carrier.
Enable the eSIM Card
Enable an eSIM card if you want to use it again.
On the SIM management screen, touch next to SIM 2. Enable the eSIM card as
prompted.
Disable the eSIM Card
If you do not want to use an eSIM card or want to switch to another eSIM card, you can
disable it easily.
Settings
98