honor Magic Vs - Connect to the Wi-Fi Network

1 On Data usage page, tap More data settings > Monthly data limit, and set according
to the on-screen instructions.
2 On More data settings page, tap Usage reminders. You can make the system send
reminders or directly cut  Internet access when monthly mobile/roaming data usage
exceeds the limit.
3 On More data settings page, you can also enable Lock screen data usage reminder.
Connect to the Wi-Fi Network
Introduction to Wi-Fi
Connecting to the Internet over Wi-Fi is an  way to save mobile data. You can also
enable Wi-Fi security monitoring to avoid risky hotspots and ensure safe Internet access.
Access Wi-Fi Network
Please be cautious when accessing free Wi-Fi in public places to avoid potential safety hazards
such as privacy leakage and  loss.
Enter PIN to connect to Wi-Fi network
1
Go to Settings > Wi-Fi and turn on Wi-Fi.
2
On the setting page, you can connect to a Wi-Fi network by any of the following
methods:
• Tap the Wi-Fi network that you want to connect to under Available networks. If an
 network is selected, you need to enter the password.
• Pull down to the bottom of the menu, tap Add network, and follow the screen
prompts to enter the network name and password to complete the connection.
When the status bar displays , it indicates that the phone is accessing the Internet
through Wi-Fi.
Connect via scanning QR code
1 Go to Settings > Wi-Fi and turn on Wi-Fi.
2 Go to the Wi-Fi setting page on the phone that shares the network, tap the network
that is connected, and get the QR code.
3 Scan the QR code on the phone to be connected to the network and follow the prompts
to access the network.
Some  networks may not  connection by code scanning. Please refer to the
actual situation.
Get Familiar
13