Share the tablet screen
Tablet screen can be shared with MagicRing devices of the same ID, including computer or
phone. You can use tablet on MagicRing computer or phone of the same ID, and you can
also directly drag and drop to and from your computer or tablet.
Method 1:
1 Enter the MagicRing page of any MagicRing device, including phone, tablet and
computer.
2 Tap the device ball of the MagicRing tablet.
3 Drag the screen sharing of the phone’s device ball to the computer or tablet.
Method 2: Swipe up with three on the home screen of tablet to enter the
MagicRing page. screen sharing will display in the form of a card. You can drag
this to computer or tablet.
You can tap the on screen sharing card on the MagicRing page of any
MagicRing phone, tablet or computer or drag the screen sharing card adsorbed on
the device ball out of the adsorption area to disconnect.
Easy Projection
Project Your Tablet Screen Wirelessly
You can project your tablet screen wirelessly to a large display (such as a TV).
1
the following based on the model and functions of the large display:
• If the large display suppos Miracast/cast+, turn on its wireless projection switch.
• If the large display does not suppo Miracast/cast+, connect a wireless HDMI
adapter to it. Ensure that the wireless HDMI adapter is connected to a power supply.
To check whether the large display Miracast/cast+ and how to enable wireless
projection on it, consult the user guide or customer of the large display
manufacturer.
2 On your tablet , swipe down from the top right of the screen to open the Control Center,
and turn on .
3 Swipe down again to show all and enable Wireless Projection. Your tablet will
searching for available display devices.
4 In the device list, touch the name corresponding to the large display or wireless HDMI
adapter to complete the projection connection.
Alternatively, swipe down from the top middle or left of the screen to open the
Center, and touch .
HONOR Connect
22
To Next Page
Loading...
