2 Tap on the high data-consuming application to restrict its use of mobile data, roaming
data, etc.
Some applications (such as those generated by App Twin) cannot restrict Internet access in
the “Data usage management”. Please go to Settings > Apps > Apps, search for the name
of the app, and tap Data usage to restrict its Internet access.
Connect to the Wi-Fi Network
Introduction to Wi-Fi
Connecting to the Internet over Wi-Fi is an way to save mobile data. You can also
enable Wi-Fi security monitoring to avoid risky hotspots and ensure safe Internet access.
Access Wi-Fi Network
Please be cautious when accessing free Wi-Fi in public places to avoid potential safety hazards
such as privacy leakage and loss.
Enter PIN to connect to Wi-Fi network
1
Go to Settings > Wi-Fi and turn on Wi-Fi.
2
On the setting page, you can connect to a Wi-Fi network by any of the following
methods:
• Tap the Wi-Fi network that you want to connect to under AVAILABLE NETWORKS.
If an network is selected, you need to enter the password.
• Pull down to the bottom of the menu, tap Add network, and follow the screen
prompts to enter the network name and password to complete the connection.
When the status bar displays , it indicates that the tablet is accessing the Internet
through Wi-Fi.
Connect via scanning QR code
1 Go to Settings > Wi-Fi and turn on Wi-Fi.
2 Go to the Wi-Fi setting page on the tablet that shares the network, tap the network
that is connected, and get the QR code.
3 Scan the QR code on the tablet to be connected to the network and follow the prompts
to access the network.
Some networks may not connection by code scanning. Please refer to the
actual situation.
Transfer Data Using Wi-Fi Direct
You can use Wi-Fi Direct to transfer data between HONOR devices. Wi-Fi Direct allows you
to transfer large to a nearby device more quickly than Bluetooth and without having to
pair the devices.
Get Familiar
5
To Next Page
Loading...
