Hoogo B3+ - Page 28

Instruction Manual hoogo B3+
Prepare use
E
26
3.1 Unpacking
The packaging protects the vacuum cleaner against
transport damages. Keep the packaging for transport
purposes. Disposal information is provided at the end of
the instructions.
Follow the action steps listed to unpack the appliance.
1. Unpack the appliance and its accessory compo-
nents.
2. Check the completeness and intactness of the
unpacked contents.
Ö In case of transport damages or missing parts, turn
to your dealer without delay.
3.2 Become acquainted with the display
The appliance has dust filling level display (Fig. 1, p. 2,
no. 11). The dust filling level display inspection window is
filled increasingly in blue as the filling level of the dust
bag increases.
Ö Replace the dust bag at the latest when the dust
filling level display is fully blue („5.1 Replacing the
dust bag“ on page 32).
3.3 Assembly
3.3.1 Assembling the suction tube
Before you assemble one of the nozzles, you must
assemble the suction tube.
1. Insert the hand grip (Fig. 1, no. 6) into the upper end of
the suction tube (Fig. 1, no. 3) until the adapter engages
audibly and noticeably.
3.3.2 Assembling the nozzles
ATTENTION
Danger of injury!
Unintended activation of the appliance may result in
injury.
►
Switch the appliance o before assembling the
nozzles.
►
Secure the appliance against unintended
activation before assembling the nozzles.