Need help?Do you have a question about the Hook Wizard and is the answer not in the manual?
Essential precautions for electric shock, fire, and proper usage to ensure user safety.
Clarification of warning symbols like lightning flash and exclamation point.
Detailed instructions on ventilation, power cords, liquids, tube handling, and speaker connections.
Lists controls that can be programmed for custom settings.
How to switch channels and utilize different EQ/voicing settings for each.
Instructions on saving user-defined presets and changing preset numbers.
Details on preset banks (A/B) and MIDI program change commands for preset selection.
How to adjust reverb levels and select/save cabinet impulse responses.
Guide to changing the amp's MIDI channel for external control.
Critical instructions to connect a speaker or use the load switch to prevent amp damage.
Connecting MIDI devices and adjusting the presence control for cabinet matching.
Procedure for powering on, using standby, and specific fuse types for replacement.
Using the effect loop and identifying the location and function of each vacuum tube.
Explanation of the 'Secret Sorcery' function for morphing between presets using MIDI.
Details on the speaker simulator's GND lift, Mic/Line output, and XLR to jack conversion.
Instructions for connecting the amp to a computer for software operations.
Guide to using the Ampir software for IR management, backups, and firmware updates.
Technical specifications for the IR speaker simulator, including latency and dynamic range.
Details on the amplifier's physical size and weight.
To Next Page
General