MAINTENANCE
Treat reel as any other high-end shing equipment. Minimize
exposure to extreme salt spray, even though the reel is sealed.
Rinse reel after every use with dish soap and clean water and dry
thoroughly. Wiping with water repellent lubricants such as
WD-40
®
, CorrosionX
®
, or CRC Heavy Duty Silicone is
recommended.
SERVICE AND STORAGE
Store the reel in a cool, dry place. Service your reel every shing
season or annually.
The Electric attachment should be inspected and maintained
on a yearly basis for corrosion on wiring and plugs. At the same
time it is recommended to check the boat wiring for corrosion as
well.
There are no parts inside the attachment that can be serviced
except by PENN Fishing Tackle. If you have any problems or
concerns with reel performance or operation, please contact our
customer service at 1-800-892-5444.
1-YEAR PARTS WARRANTY / 1-YEAR LABOR WARRANTY
Hooker Electric reels are cover by a 1-Year Warranty on parts for
manufacturer defects and 1-Year Warranty on labor. Warranties
begin from the date of purchase. Within this set time period,
PENN Fishing Tackle will, at its discretion, repair or replace any
component on the attachment which has failed under “normal”
operation of the reel. These repairs and/or replacements will
be provided at no additional charge for parts and labor. The
customer will be entirely responsible for shipping cost to return
reel. This warranty does not cover any type of failures due to
accident, misuse, abuse, alteration or repairs done prior or after
the attachment of the Hooker Electric module(s). PENN Fishing
Tackle assumes responsibility for warranty claims of parts and
labor for all new Shimano
®
reels modied to t the Hooker
Electric motor.
To Next Page
Loading...