Hootoo HT-BS012 - Same Code Delay Time Setting; Same code delay time 0 sec; Same code delay time 1 sec; Same code delay time 2 sec

11
12
Beeper Sound Off
Same code delay time infinite
Same Code Delay Time Setting
Same code delay time 0 sec *
Same code delay time 1 sec
Same code delay time 2 sec
Set up the minimum delay time between decoding of the same codes:
Lower Beeper Volume
Medium Beeper Volume
High Beeper Volume
Single Scan
Automatic Off
Automatic On
Scanner Reading Setting
Continuous Scan
Note: When you use the automatic mode, the sleep time is set to 15 minutes.
Disable
LF
CR+LF
CR
Code Suffix / Prefix Setting
Preamble - STX