12.
Maintenance (continued)
Hand Turbo Brush
Warning: Ensure the cleaner is unplugged from the mains power supply when
performing any maintenance.
1. To remove the clear cover the collar lock must be in unlocked
by twisting the collar lock anticlockwise.
2. The rotating bristles must be unlocked and in the upward
position. To unlock the rotating bristles push the lock button
on the side of the turbo brush to the downward position.
3. Remove the clear cover.
4. Remove any dirt or hair from the roller brush.
5. Replace the clear cover.
6. Lock the collar lock by twisting clockwise.
7. Rotate the rotating bristles to the downward position and lock
in place by pushing the lock button on the side of the turbo
brush to the upward position.
To Next Page
Loading...
