To Next PageTo Next PageWhat to do if my Hoover CH30000 won’t run?
If your Hoover Vacuum Cleaner isn't running, first ensure the power cord is firmly plugged into the wall. Then, check your fuse or breaker to make sure there's voltage in the wall plug. If you find a blown fuse or tripped breaker, replace the fuse or reset the breaker. Finally, if the thermal protector has activated, allow the cleaner to cool, following the instructions.
Why does my Hoover CH30000 Vacuum Cleaner have low suction?
If your Hoover Vacuum Cleaner has low suction, the bag might be full, so try emptying it. There could also be an obstruction in the nozzle; if so, remove it. Another possible reason is a dirty secondary filter, so try cleaning the filter.
How to fix a Hoover Vacuum Cleaner nozzle that won't pick up?
If the nozzle on your Hoover Vacuum Cleaner won't pick up, it might be because the nozzle brush is worn. In this case, you should replace the brush.
General| Current | 7.4 A |
|---|---|
| Maximum input power | - W |
| Type | Cylinder vacuum |
| Cleaning type | Dry |
| Product color | Black |
| Tube material | - |
| Dust container type | Dust bag |
| Proper use | Home |
| Noise level | - dB |
| Certification | ETL, UL |
| Cleaning surfaces | Hard floor |
| Cord length | 10210.8 m |
| Handles quantity | 1 |
| Carrying handle(s) | Yes |
| Vacuum brushes included | Dusting brush |
| Nozzle width | 254 mm |
Weight and Dimensions| Weight | 3764.82 g |
|---|---|
| Package depth | 206.502 mm |
| Package width | 539.75 mm |
| Package height | 304.8 mm |
Details the combination nozzle for carpets and hard floors.
Describes the adjustable carrying strap.
Mechanism for attaching tools or wands.
Used with nozzles and tools for added length.
Locks extension wands to nozzles and tools.
Lists critical safety precautions to prevent hazards like fire, shock, or injury.
Explains how to use the polarized plug for electrical safety.
Informs about chemical content known to cause cancer, requiring hand washing.
Details operation for both carpet and hard surface floors.
Describes enhanced edge cleaning feature near baseboards.
Instructions on how to attach and detach cleaning tools.
Explains how to use the blower function for cleaning inaccessible areas.
Information on checking, emptying, and replacing the dust bag.
Details the function and cleaning of the secondary filter.
Advice on maintaining the rug and floor nozzle brushes.
Lists potential reasons and solutions for the cleaner not starting.
Identifies causes and fixes for reduced suction power.
Troubleshoots issues with the nozzle's ability to pick up debris.
