Hoover CH54113 - Getting Started and Operation; Initial Setup and Assembly

12
Getting Started
1
Insert Handle.
4
Check to ensure
filter bag is secure
in bag door.
2
Press tab to lock
handle into place.
5
Rotate height adjust
lever to desired level.
If vacuum is difficult
to push, turn knob to
next higher setting.
6
To reduce the risk of
disconnection of the
appliance cord from
the extension cord
dur ing op e ra t ing, mak e
a knot as shown on
page 5 in Figure 1.
3
Insert Accessory
Tools.
WARNING TO REDUCE THE RISK OF PERSONAL INJURY–UNPLUG BEFORE CLEANING OR SERVICING.