EasyManua.ls Logo

Hoover CH54115 - Inlet Filter Maintenance

Hoover CH54115
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
FILTERS
1
If the filter becomes dirty, pull
off the grill and lift out the filter.
Hand rinse in cold water under
low pressure. Let filter dry for 24
hours. Reposition dry filter and
snap grill into place.
Inlet Filter
The inlet filter protects the motor from damage.
REPLACEMENT FILTER
Replace Inlet filter every 6 months to keep vacuum running at peak performance.
Part No. 440007774
WARNING TO REDUCE THE RISK OF PERSONAL INJURY, UNPLUG VACUUM BEFORE CLEANING OR SERVICING. DO
NOT OPERATE VACUUM WITHOUT BOTH INLET FILTER AND FINAL FILTER IN PLACE.

Related product manuals