12
6
Insert battery into housing by
grasping the integrated handle
and pushing firmly in until battery
locks into place.
8
Turn vacuum on by
pressing switch forward
or back to select desired
power level.
Press backward to
the ON position (
I
) for
normal cleaning and less
disruption, with lower
decibel noise levels.
Press forward to the
BOOST position (
II
) when
more power is desired, for
cleaning entry rugs or high
traffic areas.
Turn off by locating switch
in middle position (
O
).
7
Push handle release
pedal with foot and pull
back on handle.
9
To remove battery, grasp the
integrated handle while pressing
the release button. Slide out from
housing by pulling while holding
down release button.
Getting Started
IF YOU NEED ASSISTANCE
Please call 1-800-944-9200 US, 1-800-263-6376 CAN
(Mon-Fri 8am-7pm EST) to speak with a customer service representative;
or visit our website at HooverCommercial.com.
To Next Page
Loading...
Need help?
General
