Need help?Do you have a question about the Hoover Dirt FINDER and is the answer not in the manual?
General| Brand | Hoover |
|---|---|
| Model | Dirt FINDER |
| Category | Vacuum Cleaner |
| Language | English |
Follow basic safety precautions and warnings before using the appliance to prevent fire, electric shock, or injury.
Unpack the cleaner from the carton, identify all parts shown, and dispose of packing materials.
Details the function and location of various parts of the Hoover cleaner, numbered 1 through 28.
Guidance on how to move the cleaner between rooms using the handle and wheels.
Explains the three handle positions: upright, operating, and low, for different cleaning needs.
Instructions on how to turn the cleaner on and off using the main switch.
Details how the self-propel feature works and how to use the control button for maneuverability.
Describes how to use the cleaner's edges for effective cleaning along baseboards and furniture.
Explains how the Dirt FINDER system alerts users to dirt levels via indicator lights and sensitivity settings.
Guide on how to adjust the nozzle control knob for different carpet pile heights and bare floors.
Instructions on how to use the cord hook for quick release and storage of the power cord.
Details on how to use the air freshener dispenser and control fragrance release.
Step-by-step guide on connecting the hose to the cleaner to use various cleaning attachments.
Describes the proper use of the dusting brush, furniture nozzle, crevice tool, wand, and bare floor tool.
Guidance on when to replace the bag, including indicators and factors affecting replacement frequency.
Information on where to buy genuine Hoover dust bags and the importance of using the correct type.
Instructions on how to replace the 9-volt battery for the Dirt FINDER system.
Step-by-step guide on how to replace the headlight bulb using a screwdriver.
Explains the two belts (agitator, self-propel) and their functions, and what to buy.
How to check the condition of the agitator belt and use the belt check indicator.
Steps to disconnect the cleaner and hose to remove obstructions when using attachments.
Procedure to remove bottom plate and agitator to clear obstructions from the dirt duct.
Guidance on checking the condition of agitator brushes and when they need replacement.
Detailed steps for removing the bottom plate, belt, and agitator to replace the brush roll.
Instructions regarding self-lubricated bearings and periodic lubrication for agitator ball bearings.
Diagnosing and solving issues when the cleaner fails to run, checking plug, fuse, and breaker.
Troubleshooting steps for poor suction, checking belts, brushes, bag, obstructions, and hose connection.
Resolving issues with cleaning tools not picking up, checking for clogs and proper hose connection.
Addressing problems with the self-propel feature, checking the belt and control button.
How to locate service centers, order parts, and contact customer support for assistance.
Explanation of the 'Cleaning Effectiveness Per Amp' rating system and its calculation.
To Next Page