Name: Hoover DYNAMIC STEAM 10+
Brand: Hoover
Rating: 5 (1 reviews)

......................................................................................................................................................................................................................

NOTES

31

Note: it is advisable to turn off the tap after each wash

to isolate the washing machine from the water supply.

For the washing machine to function properly the terminal end of the discharge hose (mouth)

must be at a minimum of 50 cm and a maximum of 85 cm from the ground.

Electricity supply and safety advice

Washing machines are supplied to operate at a voltage of 230-240V, 50 Hz single-phase.

Check that the conductor is powerful enough to supply at least 3.0 kW, then connect the plug

to a 10A earthed socket.

After installation,the appliance must be positioned so that the plug is accessible.

Check that the electricity supply to your home has an earthing system.

The socket in your home and the plug on the appliance must be of the same type.

It is generally not advisable to use multiple adapters and/or extension leads.

All Hoover washing machines comply with the safety requirements laid down by the Quality

Trademark Institute.

ATTENTION:

should it be necessary to replace the supply cord, connect the wire in accordance with the

following colours/codes:

BLUE - NEUTRAL (N)

BROWN - LIVE (L)

YELLOW-GREEN - EARTH ( )

30

Brand	Hoover
Model	DYNAMIC STEAM 10+
Category	Washer
Language	English

Hoover DYNAMIC STEAM 10+ User Manual

Table of Contents

Questions and Answers:

Hoover DYNAMIC STEAM 10+ Specifications

Related product manuals