EasyManua.ls Logo

Hoover Elite Rewind - Assembling the Cleaner

Hoover Elite Rewind
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Carton contents
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
A
A
B
C
D
If you need any assistance:
Visit our website at hoover.com. Click on the “Service” button to find the service outlet nearest you OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
Call 1-800-263-6376 to speak with a representative in our Consumer Response Center.
Please do not return this product to the store
.
Assembling cleaner
Di
Attach handle
Slide handle section (A) onto back of
handle.
1-2
1-3
1-5
1-1
A. Handle section and screw (taped
to handle)
B. Cleaner body
C. Cleaning tools
D. Hose
Push screw into hole on back of
handle. Tighten screw securely with a
Phillips screwdriver.
Position hose
Align end of hose with projections over
slots in dirt duct on back of cleaner.
Twist to lock in place.
The hose connector allows the hose to
swivel.
LOCK
LOCK

Other manuals for Hoover Elite Rewind

Related product manuals