Hoover FH50251PC - Getting Started with Your Power Scrub Elite

9
1 42 3
Press down on top
latch of clean water
tank and pull to remove.
Angle the Solution/
Clean Water tank back
on the base and click it
into place.
Twist off the clean water
cap on the top of the
clean water tank. Add
warm water to ll line and
replace cap. – DO NOT
BOIL OR MICROWAVE
WATER (Do not ll with
water above 140˚ F (60˚ C)
Twist off the solution
cap on the top of the
clean water tank and
pour cleaning solution
into tank. Replace cap.
Getting started with your Power Scrub Elite
™
:
To fill the Clean Water/Solution Tank: