14
6 75
Release the trigger and
slowly push forward. Then
slowly pull back toward you
without squeezing the trigger.
Continue pushing forward
and back without squeezing
the trigger until little water is
visible passing through the
nozzle.
For Best Results, Hoover
recommends rinsing the
carpet with clean water only.
This will remove residual
carpet cleaning solution from
your carpets. To Rinse with
clean water only, set the wash/
rinse dial to Rinse and then
repeat steps 5 and 6.
Squeeze trigger to apply
water and cleaning
solution. Slowly push
forward then backwards
while squeezing the
trigger.
Using your Power Scrub Elite
™
:
To Next Page