Why Hoover Washer/Dryer is not spinning?
If your Hoover Washer/Dryer isn't spinning, try removing and de-tangling the load, then reload and restart the spin program. Ensure that the 'no spin' function isn't selected and check the selected options' effect on the spin cycle. Excessive detergent can also impede spinning, so use the correct amount. If the water hasn't completely drained, wait a few minutes.
Why Hoover H-WASH&DRY 500 does not spin?
If your Hoover Washer/Dryer isn't spinning, here's what you can check: * If the load is unbalanced, the machine may attempt to balance it, extend the spin time, reduce spin speed, or even abort the spin cycle to prevent damage. Try removing the load, detangling it, reloading it evenly, and restarting the spin program. * Wait a few minutes to see if the water drains completely. If not, this could be due to the fact that water has not been completely drained. * Ensure that the "no spin" function is not selected (if your model has one). * Make sure you are using the correct amount of detergent.
What to do if Hoover H-WASH&DRY 500 shows error E7?
If your Hoover Washer/Dryer displays error code E7 or shows 7 LED flashes, make sure the door is correctly closed and that no clothes are preventing it from fully closing. If the door is locked, turn off and unplug the machine, wait 2-3 minutes, and then reopen the door.
What does E3 error mean on Hoover H-WASH&DRY 500 Washer/Dryer?
If your Hoover Washer/Dryer displays error code E3 or shows 3 LED flashes, check that the filter isn't clogged and that there are no foreign objects inside the filter compartment. Also, make sure the drain hose isn't bent or trapped, and ensure your home drainage system isn't blocked.
What causes E4 error on Hoover H-WASH&DRY 500?
If your Hoover Washer/Dryer displays error code E4 or shows 4 LED flashes, ensure you are using the correct amount of detergent and that it is designed for use in a washing machine.
What to do if Hoover H-WASH&DRY 500 shows E3 error?
If your Hoover Washer/Dryer displays error code E3 or the LEDs flash 3 times, check that the filter isn't clogged and that there are no foreign objects inside the filter compartment. Also, ensure the drain hose isn't bent, kinked, or trapped, and that the home drainage system isn't blocked.
How to fix E2 error on Hoover Washer/Dryer?
If your Hoover Washer/Dryer displays error code E2 or the LEDs flash 2 times, make sure the water supply tap is open and the supply hose isn’t bent. Ensure the drain pipe is at the proper height. Clean the “anti-sand” filter, and check that the filter is not clogged.
What to do if Hoover Washer/Dryer shows E7 error?
If your Hoover Washer/Dryer displays error code E7 or the LEDs flash 7 times, make sure the door is correctly closed and that clothes aren't preventing it from closing fully. If the door is locked, turn off and unplug the machine, wait 2-3 minutes, and reopen the door.
What to do if Hoover Washer/Dryer shows E4 error?
If your Hoover Washer/Dryer displays error code E4 or the LEDs flash 4 times, ensure you're using the correct amount of detergent designed for washing machines.
What to do if Hoover H-WASH&DRY 500 shows E2 error?
If your Hoover Washer/Dryer displays error code E2 or the LEDs flash twice, it means the machine can't load water. Here's how to troubleshoot: * Ensure the water supply tap is fully open. * Check that the water supply hose isn't bent, kinked, or trapped. * Verify the drain pipe is at the correct height. * Close the water supply tap, detach the filler hose from the machine's back, and inspect the "anti-sand" filter for blockages. * Examine the filter compartment for clogs or foreign objects obstructing water flow.
General| Load Capacity (Washing) | 9 kg |
|---|---|
| Load Capacity (Drying) | 6 kg |
| Energy Efficiency Class | A |
| Spin Speed | 1400 RPM |
| Noise Level (Washing) | 51 dB |
| Noise Level (Spinning) | 77 dB |
| Number of Programs | 16 |
| Maximum Spin Speed | 1400 RPM |
| Energy Rating | A |
| Noise Level (Wash) | 51 dB |
| Color | White |
| Capacity | 9 kg (washing), 6 kg (drying) |
Essential safety advice, warnings, and electrical connection guidelines for safe appliance use.
Steps for unpacking, installing, and connecting water supply for the washing machine.
Detailed explanation of all buttons, options, and special programs on the control panel.
Troubleshooting guide for common errors, error codes, and other anomalies.
To Next Page