B. Front cover button
C. Front cover
D. Telescopic extension tube
E. Dust full indicator
F. Cord re-wind button
G. Power level adjust button
H. Power On/Off button
I. Floor type adjust button
J. Flexible Hose
ASSEMBLING THE PRODUCT
Connect the hose with vacuum cleaner
Insert flexible hose J into the air-intake opening on the front cover C
Press the knob until it clicks into the position
Remove the flexible hose:
Unplug the appliance and press the button at the end of the flexible hose J
Remove it from the air-intake opening on the front cover C
Fit the telescopic hose to the angled pipe
Fit the multi floor tool to the telescopic tube
OPERATING INSTRUCTIONS
CAUTION: The air-intake nozzle and attachments must always be free of obstructions,
otherwise the motor will overheat and could be damaged.
To Next Page
Loading...
