Operation
9
1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
‘HEAT SETTING’ button to reduce the
heat level. Press again on completion, to
select high temperature.
3. Turn ‘DRYING TIME’ dial until the
required drying time aligns with the
symbol ●.
The Pre-ironing setting shown by the
symbol on the ‘DRYING TIME’
dial provides a conditioning and anti-
crease function. The dryer will heat the
load for 8 minutes followed by a 2
minute cool down period and is
especially good for garments which
may have been left for some time prior
to ironing, in a linen basket for
example. Garments may also become
stiffened when dried outside on a
washing line or inside on radiators. The
PRE-IRONING process relaxes the
creases in the fabric making ironing
quicker and easier.
4. Gently close the door pushing it slowly
until you hear the door ‘click’ shut.
5. Press the ‘ON’ button. The indicator
will light and the drying cycle begins.
6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 15 minutes
to reduce creasing and cool the load
ready for handling.
1. ‘ON’ button and indicator – press to switch on, the indicator will light.
2. ‘HEAT SETTING’ button - press to reduce the heat level for delicate items, press
again to select high temperature.
3. ‘DRYING TIME’ dial - selects drying time or pre-ironing option.
4. ‘FILTER CARE’ indicator - lights when filter needs cleaning.
5. ‘EMPTY WATER’ indicator - lights when water container is full.
Heat setting
Heat setting
Heat setting
Heat setting
Operation
To Next Page
Loading...
