Hoover HFX - Cleaning the Mini Bin and Filter; Mini Power Nozzle Maintenance

2 3 4 51
1 2 3 4 5 6
9
5.3 CLEANING THE MINI BIN AND ITS FILTER
5.4 MINI POWER NOZZLE*
1. Empty the dust bin over a trash bin pressing the mini bin ap release button.
2. Press the mini bin release button and remove the handheld unit from the mini bin.
3. Pull out the lter assembly from the mini bin.
4. Wash the lter in lukewarm water and leave to dry for 24 hours.
5. Reassemble once completely dry and ret to the product.
NOTE: Do not use hot water or detergents when cleaning the lter. In the unlikely event of the lter
becoming damaged, t a genuine Hoover replacement.
IMPORTANT: For optimum performance, always keep your lters clean. We recommend that the lters
should be washed at least once a month.
1. Switch o your product.
2. Remove the mini power nozzle from your product and turn over.
3. Using a coin, open the brushbar release lock and remove the brush bar.
4. Using scissors, remove any tangled bres or debris from the brushbar.
5. Look inside the nozzle and remove any debris.
6. Ret the brushbar into the nozzle and using a coin, lock into position.
GB
* Dependant on your model.