Chapter 4.3 - Storage
Put the iron on the heat-resistant iron-resting mat (3).
Switch o the appliance and unplug it.
Empty the water tank.
Wait at least 30 minutes allowing the soleplate and the generator to cool down.
Lock the iron thanks to the iron lock system (2). Please report to the dedicated
chapter 1.2 for further instructions.
Store both steam and electrical cables in the cord storage feature (6).
For model SRD 4110, put the anti-wrinkles brush on its support and put the cable
in its storage.
Use the handle (4) in order to carry the appliance by following the requested
instructions of chapter 1.3.
Then you can take away your appliance in order to store it safely and easily.
To Next Page
Loading...
Need help?
General
