7
OPERATION
IMPORTANT: THIS MACHINE IS ONLY TO BE USED WITH HOOVER ONEPWR BATTERIES AND CHARGER.
PLEASE READ THE SAFETY GUIDE BEFORE USE.
Before first use, ensure the battery is fully charged. Failure to fully charge the battery before first use may result
in poor battery performance. The life expectancy of the battery will vary depending on the usage of
the machine.
Inserting the battery
Charging the battery
Slide the battery down on to
the charger.
The charger light will flash white to
show when the battery is charging.
The light on the charger will stop
flashing and go off when the battery
is fully charged.
Once fully charged, slide the battery
off the charger to remove.
To check the battery charge
level press the battery symbol.
Place your foot on the powered
head.
CAUTION: The brushbar in the powered head constantly rotates when switched on. Never use the powered
head on one spot for an extended period of time as the brushbar may damage the floor surface. Always turn
the powered head brushbar off when cleaning hard floors. To prevent any damage being sustained, test on an
inconspicuous area of the flooring first.
Slide the battery into the handheld
until it clicks into place.
Pull the handle backwards to recline.
To Next Page
Loading...
Need help?
General
