13
REMOVING AND REPLACING THE BRUSH ROLL
321
4
Re-fit the brush roll into the nozzle and
turn the brush roll lock clockwise to lock.
To remove any threads or hair, slide the
blade of a pair of scissors into the groove
of the brush roll and cut along the groove.
Clear any dirt/debris from the end caps and
inside the housing of the nozzle.
Pull the brush roll out of the nozzle with
the pull tab.
Remove the battery. Using your fingers or
a coin, push and turn the brush roll lock
counterclockwise to release the brush roll.
WARNING:
RISK OF PERSONAL INJURY - BRUSH ROLL MAY SUDDENLY RESTART. TURN POWER
SWITCH OFF AND REMOVE BATTERY BEFORE CLEANING OR SERVICING.
To Next Page
Loading...
