Hoover ONEPWR Evolve - Assembly Instructions; Product Assembly Steps

6
(A) (B)
click
click
click
click
ASSEMBLY INSTRUCTIONS
FULLY ASSEMBLE PRODUCT PRIOR TO USE
321
Attach the battery pack
by aligning the ribs on
the battery pack to the
grooves in the product.
Slide the battery pack into
the product until it clicks
into place.
Push the hand vacuum onto the
adapter until it clicks into place.
Install the wand into the body until
it clicks into place (A). If your model
comes with the Dust Chaser
TM
Hand
Vacuum, first connect the adapter into
the body until it clicks into place (B).
Dust Chaser
TM
Hand Vacuum not included with all models.