Hoover POWER PATH PRO User Manual

9
1
4
2 3
Grasp Dirty Water
Tank handle and
push latch to release.
Pull tank out at an
angle like this.
Replace lid by lining up
the hinge and pulling
latch down to lock. Latch
will line up with hinge and
snap when secured.
Empty the Dirty Water
Tank by pulling up on
the latch at the back
of the tank to open.
Remove lid and
empty tank.
WARNING
To reduce the risk of personal injury -
Unplug before cleaning or servicing.
!!
Emptying your Power Path
™
Pro dirty water tank:

Hoover POWER PATH PRO Specifications

General

Type	Upright
Brush System	Multi-Cyclonic
Bagged/Bagless	Bagless
Hose Length	8 feet
Attachments	Crevice Tool, Upholstery Tool
Dust Capacity	1.5 L
Filter Type	HEPA