What to do if my Hoover POWER SCRUB DELUXE's Dirty Water Tank Debris Filter is clogged?
If the Dirty Water Tank Debris Filter in your Hoover Vacuum Cleaner is clogged, remove and clean the filter.
What to do if there is solution build up clogging the hose line of my Hoover POWER SCRUB DELUXE Vacuum Cleaner?
If you have solution build up clogging the hose line of your Hoover Vacuum Cleaner, fill the Clean Water Tank with warm water and squeeze the hose trigger.
Why won't the brushes rotate on my Hoover POWER SCRUB DELUXE Vacuum Cleaner?
The brushes on your Hoover Vacuum Cleaner will not rotate if the unit is in the upright position.
What to do if my Hoover POWER SCRUB DELUXE Vacuum Cleaner has a blockage in the hose?
If you suspect a blockage in the hose of your Hoover Vacuum Cleaner, try dropping a coin through it or use a broom handle to clear the obstruction.
What to do if the Hoover POWER SCRUB DELUXE Dirty Water Tank is full?
If the Dirty Water Tank is full on your Hoover Vacuum Cleaner, remove and empty the Dirty Water Tank.
Why is my Hoover Vacuum Cleaner leaking residual moisture after use?
The Hoover Carpet Cleaner may drip residual moisture after use. Allow the unit and brushes to dry before storing on a hard floor surface.
What to do if the Hoover POWER SCRUB DELUXE Recovery Tank is not properly secured?
If the Recovery Tank on your Hoover Vacuum Cleaner is not properly secured, replace the Recovery Tank and secure the recovery tank latch.
What to do if my Hoover POWER SCRUB DELUXE has a blockage in the nozzle?
If there is a blockage in the nozzle of your Hoover Vacuum Cleaner, remove and clean the nozzle.
What to do if the Hoover Vacuum Cleaner Recovery Nozzle is not on correctly?
If the Recovery Nozzle on your Hoover Vacuum Cleaner is not correctly attached, remove and reattach the Recovery Nozzle.
What to do if my Hoover Vacuum Cleaner Hose latch door is not closed?
If the hose latch door on your Hoover Vacuum Cleaner is not closed, snap the hose latch door into place.
General| Type | Carpet Washer |
|---|---|
| Weight | 18.1 lbs |
| Tank Capacity | 1 gallon |
| Cleaning Path | 11.25 inches |
| Cord Length | 20 feet |
| Heated Cleaning | Yes |
| SpinScrub Brushes | Yes |
| Power Source | Corded Electric |
| Included Tools | Upholstery Tool |
| Warranty | 2-year limited warranty |
Instructions to save for future reference.
Critical safety warnings for operation, shock, fire, and damage.
Guidelines for proper electrical grounding.
List of all items included in the product packaging.
Steps for attaching the handle to the cleaner base.
Instructions for placing the water and solution tank.
Guidance on storing accessories and tools.
How to properly store the power cord.
Important note regarding carpet material compatibility.
Procedures for emptying and cleaning the dirty water tank.
Detailed instructions for washing carpets.
Guidelines for using the cleaner on hard floor surfaces.
List of tools provided in the mesh storage bag.
Instructions for connecting various tools to the hose.
Procedure for removing and cleaning debris from the nozzle.
Instructions for removing, cleaning, and replacing brushes.
Steps for preparing the cleaner for storage.
Note on lubrication requirements for the motor.
Possible causes and solutions when the cleaner does not operate.
Troubleshooting steps for reduced suction power.
Solutions for issues with spraying liquid or no spray.
Troubleshooting steps when clean water or solution won't dispense.
Solutions for brushes not rotating during floor cleaning.
Details on the product's coverage under the limited two-year warranty.
Procedure for submitting a warranty claim.
Exclusions from the product warranty.
Additional terms and conditions related to the warranty.
Links to download additional resources.
List of other relevant product manuals.
To Next Page
