Hoover SMARTWASH PET COMPLETE AUTOMATIC CARPET CLEANER User Manual

USE ONLY RECOMMENDED
HOOVER
®
SOLUTIONS
QUICK START GUIDE
SMARTWASH PET COMPLETE AUTOMATIC CARPET CLEANER
GETTING STARTED
PRO TIPS
Allow SpotChaser solution to soak into
stains for 5min before cleaning carpet.
For best results, use only
HOOVER
®
brand solutions.
Do not mix solutions with water
when filling Solution Tank.
USE RECOMMENDED
HOOVER
®
SOLUTIONS
Quarter turn and
pull to remove cap
1
Attach Clean Water Tank & Handle.
3
Remove Solution Tank, fill & reinsert.
2
Pinch tabs on SpotChaser Tank and pull downwards. Fill with
HOOVER
®
SpotChaser Wand Formula and push it back
into Handle.
4
Remove Clean Water Tank, fill
with warm water & reinsert.
961003488

Hoover SMARTWASH PET COMPLETE AUTOMATIC CARPET CLEANER Specifications

General

Type	Carpet Cleaner
Brand	Hoover
Water Tank Capacity	1 gallon
Pet Tool	Yes
HeatForce Technology	Yes
Surface Recommendation	Carpet
Power Source	Corded Electric
Voltage	120 volts
Wattage	1200 watts
Cleaning Path Width	12 inches
Power Cord Length	22 feet
Special Feature	Automatic Cleaning
Included Components	Pet Tool

Summary

Getting Started Guide

Initial Setup Steps

Instructions for attaching water tank, filling SpotChaser tank, and reinserting components.

Setup Pro Tips

Advice on mixing solutions, pre-soaking stains, and using recommended brands for optimal results.

How to Use SpotChaser Pre-treat Wand

SpotChaser Wand Operation

Steps for releasing, aiming, and using the SpotChaser wand to dispense solution on stains.

SpotChaser Wand Maintenance and Tips

Guidance on keeping the wand upright, drying tanks, and emptying the Dirty Water Tank for proper suction.

How to Use Main Unit

Main Unit Operation

Instructions for operating the main unit using pedals for washing carpets with forward and backward strokes.

Main Unit Maintenance and Tips

Advice on cleaning the filter, slow operation for results, and system care for optimal performance.