QUICK START GUIDE
Remove Clean Water Tank, fill
with warm water & reinsert.
4
Quarter turn and
pull to remove cap
USE ONLY
RECOMMENDED
HOOVER
®
SOLUTIONS
Remove Solution Tank, fill & reinsert.
3
PRO TIPS
Allow Spot Chaser
™
solution to soak into
stains for 5 min before cleaning carpet.
For best results, use only
HOOVER
®
brand solutions.
Do not mix solutions with water
when filling Solution Tank.
USE RECOMMENDED
HOOVER
®
SOLUTIONS
Pinch tabs on Spot Chaser
™
Tank and pull downwards. Fill
with HOOVER
®
Oxy Spot Chaser
™
Wand Formula and push it
back into Handle.
3
Attach Clean Water Tank
& Handle.
Position Nozzle onto foot, making sure
to align the tabs at the top of the Nozzle
with the notches inside the foot. Slide
Nozzle forward to snap into position.
21
GETTING STARTED
®