Press cord into cord clip on back of
handle. Pull cord tight and wrap cord
around hooks (A2).
5
1-10
1 - 1 1
1 - 1 2
1 - 1 3
1 - 1 4
F
A2
E
Storing hose & tools
Store hose on holder by first positioning
hose in front section of clip.
Continue wrapping hose under lower
hook (E). Snap hose end fully into hold-
er (F).
The hose end must be pushed com-
pletely down into holder (F) to ensure
maximum suction when cleaning
floors.
Position stair/upholstery nozzle in holder
at base of cleaner and snap it into place
as shown at arrow.
Powered hand tool
The powered hand tool is shipped in a
plastic bag for protection. Remove the
bag before using the tool by first open-
ing tool door.
To remove powered hand tool, pull it
down and outward.
To reposition the tool, reverse this proce-
dure.
How to reattach tool
cover
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
holes on sides of tool storage area.
1 - 1 6
1 - 1 5
To Next Page
Loading...
Need help?
General
