11.
Instructions for Use
Maintenance
Cleaning of canister and filters
1. Remove the hand vac from the stick vac by pressing
the handvac release button.
2. Once the hand vac is removed from the unit, press the
release buttons on the canister body to remove the
dust canister.
3. To empty the dust bin, pull stright up.
Note: To install the dust canister, ensure it is seated inside
the housing before gently pushing into place to lock the clip.
DO NOT apply excessive force to lock the canister into the
housing, this may damage the clips.
IMPORTANT! Switch off the vacuum cleaner before
performing any maintenance duties.
To Next Page
Loading...
Need help?
General
