Control panel and indicator lights
Programme Selector – Select the required programme.
On/Off button and indicator (Marche Arrêt) – Press to switch on, the indicator
will light. The display will show the selected programme (see Programme
Guide).
Acrylics/Synthetics button (Séchage Délicat) – Press to reduce the heat level for
delicate items, the indicator above the button will light up. To change the heat
setting the programme must be reset.
Low Heat - Indicator light ON
High Heat - Indicator light OFF
Start/Pause button (Départ Pause) – Press to commence the selected drying
programme.
Buzzer button (Arrêt Sonnerie) – The buzzer is active in normal operation. To
cancel the buzzer press the button and the indicator will light up.
Delay Start button (Départ Différé) – Allows the user to delay the start of the
drying cycle (see details of Operation on page 16).
Empty Water indicator (Réservoir Plein) – Lights when the water container tray
is full.
Filter Care indicator (Entretien Filtre) – Lights when the filter needs cleaning.
Time to End indicator (Temps Restant) – Lights when the programme starts.
Start Delay indicator (Départ Différé) – Light flashes when the programme
starts.
Digital Display – The two digit display indicates the selected programme, the
Start Delay and the Time to End of the programme.
11
Controls and indicators
ACRYLICS/
SYNTHETICS
BUTTON
ON/OFF
BUTTON
BUZZER
BUTTON
FILTER
CARE
INDICATOR
EMPTY
WATER
INDICATOR
PROGRAMME
SELECTOR
START/
PAUSE
BUTTON
DELAY
START
BUTTON
TIME TO
END
INDICATOR
DIGITAL
DISPLAY
START
DELAY
INDICATOR
To Next Page
Loading...
