Hoover WINDTUNNEL TANGLE GUARD UH77110 User Manual

WINDTUNNEL
™
TANGLE GUARD
™
UPRIGHT VACUUM
3
Insert the lower end of the hose into the
hose port. Then insert the upper end into
the handle port.
GETTING STARTED
Insert the handle into the
wand. You will hear a click
when inserted properly.
1
Insert the wand firmly
into the unit.
2
Fully assemble product prior to use.
Plug in, then push the
Power Button on the
shoulder to power
ON/OFF.
1
QUICK START GUIDE
USING YOUR PRODUCT
2
Hold for 3 seconds to
turn brushroll off.
3
For above floor
cleaning, release handle
for up close cleaning.
4
For above floor
cleaning, release wand
for hard-to-reach
cleaning.

Hoover WINDTUNNEL TANGLE GUARD UH77110 Specifications

General

Brand	Hoover
Model	WINDTUNNEL TANGLE GUARD UH77110
Category	Vacuum Cleaner
Language	English

Summary

Getting Started

Product Assembly

Steps for inserting the handle into the wand, the wand into the unit, and attaching the hose.

Using Your Product

Basic Operation and Maneuverability

Instructions for powering on/off, controlling the brushroll, and adjusting for different cleaning needs.

Cleaning the Filter

Filter Maintenance Procedure

Guide on how to remove, rinse, and properly air dry the vacuum's filter.

Tools for Every Mess

Accessory Tool Guide

Descriptions for using Turbo Tool, Crevice Tool, and Dusting Brush for various cleaning tasks.